Material fold under head of cold headed hex bolt caused by severe cold heading process
Equipped with scanning electron microscope, metallographs, microscopes, and digital imaging and calibrated measurement software we can perform all types of angel, radius, thickness, and distances type of measurements.
Call ATRONA for any type of macro or micro measurement you are looking to inspect or reverse engineer.
About Atrona Menu
Services Menu
Failure Mode | Root Cause | Case Studies | Procedure SEM/EDS | Microstructure | Material ID | Heat Treat Analysis | Coating Analysis | Grain Flow | Inclusion Ratings | Porosity Analysis | Hardness Testing | Case Depth | Weld Analysis | Salt Spray Reverse Engineering | CMM | Micro Measurements
Services Menu Cont.
Fourier Transform Infrared Spectroscopy - FTIR | Differential Scanning Calorimetry - DSC | Thermogravimetric Analysis - TGA | Melt Flow using Extrusion Plastometer: | Filler Content and filler ID | Mechanical Testing | Hardness Testing | Failure Analysis | Reverse Engineering Magnetic Particle Inspection | Dimensional | Liquid Die Penetrant | Ultrasonic Inspection | Stereoscopic Analysis | Surface Finish Measurements | Other NDT
Services Menu Cont.
Tensile Testing | Torque Testing | Automotive Testing | Environmental Testing | Fatigue Testing - full and half wave | Life Cycle Testing | Durability Testing | Fastener Testing | Consumer Product Testing | Impact Testing | Wear Testing Liability & Litigation | Insurance | Investigations | Law Firms
Engineering Menu
