Chemical Analysis & Material Identification

Two (2) state of the art spectrometers – Latest in the field of chemical analysis.

One LECO Carbon & Sulfur Analyzer  

With two state of the art spectrometers and LECO carbon/Sulfur analyzer we are fully capable of performing chemical examination on your materials including all types of metals. Our standard reports include all main elements in the material and about 10 additional residual elemental composition found in your material. We have in our laboratory all types of standards (low carbon, alloy steel, stainless steel, tool steel, copper alloys, aluminum alloys, cast iron, titanium and specialty steels) to check your material against. We have the capability to make sure the machines are calibrated and validated prior to running your materials for the most accurate results. No matter what the material is we can test it as long as it is metal. No matter what the shape of the material is we have equipment to anneal it, flatten it and grind it if needed. We also have the capability and fixturing to test wire samples. For small quantities of material including chips or very small components we ask you typically to provide us with about 2 grams of weight or more. Typical sample, however, is a minimum of 1/2" by 1/2" flat surface.

Our capabilities include:

Plain Carbon Steels	Low Alloy Steels	Stainless Steels	Tool Steels and Maraging Steels	Titanium Alloys
High Strength Specialty Alloys	Nickel Base Alloys	Copper Base Alloys & Zinc Alloys	Aluminum Base Alloys	Cast Irons